Sandwich Panels
Sandwich Panels
TRIPAN panel: a roof envelope with a laminated PVC membrane
In a TRIPAN panel the PVC membrane is laminated to galvanised steel at 220 degrees Celsius on a separate line. The membrane is not a layer stuck on afterwards; it becomes one layer with the steel.
Read more →
Sandwich Panels
The solar compatible roof panel and the job of the five-rib profile
On a roof carrying a solar plant the panel does two jobs: it is the envelope and it carries the modules. The five-rib profile is what makes the second job possible; the rib height is 37 mm.
Read more →
Sandwich Panels
What does the TRIPAN roof panel change on a low-pitch roof?
TRIPAN is a five-rib roof panel with a PVC laminated outer sheet. Rib height 37 mm, panel length up to 15.5 metres; in practice it removes the need for a concealed gutter.
Read more →
Sandwich Panels
Tolerance in panels: why two quotations may not be the same product
The difference between two panels that look alike is hidden in the steel thickness, the core density and the declared values. Tolerance is not a defect; an undeclared tolerance is.
Read more →
Sandwich Panels
What really sets installation speed?
Installation speed comes from planning more than from the panel. Panel length, cover width, the screw system, the delivery order and a ready joint detail are all decided at the order stage.
Read more →
Sandwich Panels
Which number measures insulation performance?
The insulation of a panel is measured not by the thermal conductivity of the core but by the thermal transmittance of the section. They are different numbers, and the second one decides.
Read more →
Sandwich Panels
The structural capacity of a panel: span, load and service life
The load capacity of a panel comes from the steel, the rib geometry and the core making the two sheets work together. Spans are chosen from the load table, not estimated.
Read more →
Sandwich Panels
Fire and panels: class and resistance are not the same thing
Fire class is the reaction of a material to fire; fire resistance is the resistance of a building element in minutes. They look to separate standards, and confusing them in a specification stops the project at the permit stage.
Read more →
Sandwich Panels
Where is the environmental impact of a panel decided?
In the environmental balance of an envelope, the largest item is not production but the energy the building spends over its life. The thickness decision is therefore an environmental decision.
Read more →
Sandwich Panels
Featured
What is a sandwich panel, and which one goes on which building?
A sandwich panel is an envelope element with an insulation core pressed between two metal sheets. Core, profile and thickness are three separate decisions, made according to what the building is.
Read more →
Sandwich Panels
The cost of a sandwich panel has four parts
The cost of a panel is not its price per square metre. The panel, the installation, the difference in the structure and the energy paid over the life of the building; the fourth is often the largest.
Read more →
Sandwich Panels
The advantages of a sandwich panel: insulation, installation speed and one-piece length
The advantage of a sandwich panel is that it takes the insulation inside the envelope. Insulation on site stops being a separate trade, and a one-piece length ends the joints on the roof.
Read more →